VIS Override Rifle Package ACAL, Advanced Co-Located Aiming Laser Best in Class 150mW VCSEL Infrared Illuminator with advanced co-located laser and illuminator optics. Features adjustable focus from 4° to 25°, and improved 60° bezel motion ratio for faster transitions between focus and flood modes. Includes bezel throw lever for quick adjustments in close-quarters scenarios. Dual laser single aperture design positions both systems directly over bore for low parallax and improved shooting accuracy. HI/LO settings optimize performance for visible and infrared modes. Dual Crane ports enable remote fire and visible override capability. Mounts securely with standard lug/bolt configuration or optional ADM Quick Detach lever assembly. Compact profile sits less than 1" above Picatinny rail with saddle-bagged illuminator design for unobstructed button access.
Parts in VO Bundle: 1 pc ACAL VCSEL 150mW IR Illuminator 1 pc 18350 or 18650 LED Weapon Light 1 pc Z-BOLT® Dual Function Cable Port Tailcap 1 pc Overbore SWVL Adjustable Mount - MLOK or Picatinny OR 1 pc Meteorite Adjustable Hinge Mount - MLOK or Picatinny 1 pc AXON TRIPLE Lead (Crane) VIS Override Cable Switch - 1x Lead for Remote Fire Port - 1x Lead for Dual Function Tailcap Port - 1x Lead for Visible Override Crane Port 2 pc 18350 or 18650 Batts & Charger + 2 pc CR123A "Dual Fuel"
BUNDLE! VIS Override Package - ACAL VCSEL with Rifle Mounted Light [LE]
18350 / OB - MLOK
Sale price$2,095.00Regular price$2,595.00
Features & Benefits
VIS Override Package:
1 pc ACAL MFAL - VCSEL 150mW
1 pc 18350 or 18650 LED Weapon Light
1 pc Z-BOLT® Dual Function Cable Port Tailcap
1 pc AXON Dual Lead (Crane) Remote Cable Switch
1 pc Overbore SWVL Adjustable Mount - MLOK or Picatinny OR
1 pc Meteorite Adjustable Hinge Mount - MLOK or Picatinny
2 pc 18350 or 18650 Batts & Charger (2 pc CR123A "Dual Fuel")
Features & Benefits:
Class 3B Infrared Illuminator
- Adjustable Focus Optics 4° to 25° - 150mW VCSEL Infrared Illuminator
Improved Bezel Motion Ratio
- 60° vs 360° (DBAL D2)
- Ships With Bezel Throw Lever
- Quick Transitions - Focus to Flood (CQB)
Features & Benefits Standard Lug/Bolt or ADM QD Mount
- Easy Swap to ADM QD Throw Lever Mount HI/LO Settings for VIS/IR Infrared Illuminators
Dual Crane Ports - Remote Fire & Visible Override
VIS & IR Dot Lasers - One Aperture!
- Laser Directly Over Bore
- Low Parallax = Improved Shooting Accuracy
Excellent Optics Clearance
- Mounts < 1" Over Picatinny Rail
- Illuminator "Saddle Bagged" for Button Access
Online Orders to US resident addresses ONLY.
It is illegal to export this product. See below . . .
ITAR Restrictions
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State Office of Defense Trade Controls prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.
Specifications, Technical Data
LASER & ILLUMINATOR - TYPE
- IR Laser: 25mW: FDA Class 3B
- Green Laser: 25mW: FDA Class 3B
- IR VCSEL Illuminator: 150mW Class 3B
POWER OUTPUT (HI/LO)
- IR Laser: 25mW / 0.7mW
- Visible Green Laser: 25mW / 5mW
- IR VCSEL Illuminator: 150mW / 15mW
WAVELENGTH
- IR Laser: 850nm
- Visible Green Laser: 525nm
- IR VCSEL Illuminator: 850nm
BEAM DIVERGENCE
- IR Laser: <0.5mRad
- IR VCSEL Illuminator: 4° to 25°
- Visible Green Laser: <0.8mRad
- Visible Red Laser: <0.8mRad (ACAL-RV3)
RANGE & VISIBILITY
- IR Laser: 1500m
- Visible Green Laser: 1500m
- IR VCSEL Illuminator: 2000m
OPERATING TEMPERATURE
- IR Laser: -40°/C to +65°C
- IR VCSEL Illuminator: -40°/C to +65°C
- Visible GREEN Laser: -40°/C to +65°C
BATTERY & RUNTIME
- 1 pc CR123A Lithium
- 4 Hours - Tactical Use - Mode Dependent
ACAL-GL3 HOUSING
- Aircraft Grade Aluminum 6061-T6
- MIL-SPEC Type III Hardcoat Anodized
WEIGHT - DIMENSIONS
- 10.5oz. / 297 Grams
- L 3.97 in x W 2.64 in x H 1.73 in
- L 10 cm x W 6.69 cm x 4.39 cm
ENVIRONMENTAL
- MIL-STD-810 & IP68
- Waterproof to 5 Meters
Okay I reviewed the bigger body and it accidentally got a 2 star and I meant for it to be 4 as well. The bodies work well. But a warning ⚠️ I believe they mean don't remove tail cap at all. I misunderstood I thought if the threads weren't under spring pressure they would be fine I was wrong. I removed both and galled threads on both bodies. I was able to get them back on and the light bodies work great. But don't make the mistake that I did.
They work great but the moment I tried to remove the tail Cap and reinstall the threads galled I didn't cross thread at all they just galled.
Hi Juston, the tailcap, clip, and light body are not to be separated. We included an info card with the product explaining the issue. Batteries replaced on head end only.